Kommentare fuer Lallafa's Blog http://lallafa.de/blog Personal Musings about the Commodore64, Macs and my other Hobby Projects Sat, 05 May 2012 17:30:54 +0000 hourly 1 http://wordpress.org/?v=3.1.3 Kommentar zu dtv2ser Arduino von Magnus http://lallafa.de/blog/dtv2ser/arduino/comment-page-1/#comment-9389 Magnus Sat, 05 May 2012 17:30:54 +0000 http://lallafa.de/blog/#comment-9389 Is this blog active? Why do I need to connect pin9 on the DB9? It has no connection on the DTV. Is this blog active?

Why do I need to connect pin9 on the DB9?
It has no connection on the DTV.

]]> Kommentar zu Building a “real” Project on vamos running SAS C von Patrik Axelsson http://lallafa.de/blog/2011/12/building-a-real-project-on-vamos-running-sas-c/comment-page-1/#comment-9386 Patrik Axelsson Sun, 22 Apr 2012 20:28:23 +0000 http://lallafa.de/blog/?p=418#comment-9386 Good work! Good work!

]]> Kommentar zu plip2slip von Richard http://lallafa.de/blog/plip2slip/comment-page-1/#comment-9383 Richard Fri, 20 Apr 2012 11:44:55 +0000 http://lallafa.de/blog/?page_id=303#comment-9383 hello! a very good project! i will try it. i saw an ethernet module for the Arduino, they go for cheap; would it be possible to hook it up, and make a real network card for any amiga with parallel port? unfortunately my programming knowledge is very limited, i am only a linux sysadm, but i would be interrested. thank You! regards, Richard hello!

a very good project! i will try it. i saw an ethernet module for the Arduino, they go for cheap; would it be possible to hook it up, and make a real network card for any amiga with parallel port? unfortunately my programming knowledge is very limited, i am only a linux sysadm, but i would be interrested.

thank You!
regards,
Richard

]]> Kommentar zu rdbtool von strim http://lallafa.de/blog/amitools/rdbtool/comment-page-1/#comment-9379 strim Tue, 17 Apr 2012 11:55:52 +0000 http://lallafa.de/blog/?page_id=454#comment-9379 Sw33t, this rdbtool is something I was looking for! Sw33t, this rdbtool is something I was looking for!

]]> Kommentar zu dtv2ser Arduino von Magnus http://lallafa.de/blog/dtv2ser/arduino/comment-page-1/#comment-9378 Magnus Sun, 15 Apr 2012 20:21:44 +0000 http://lallafa.de/blog/#comment-9378 Is the Arduino powered by USB or does it need separate power? I have ordered one and hope I can solve this and reflash my DTV. I failed to flash it from PC the last time so I had to flash it via a original 1541. That took a little while ;) Now I´m adding a uIEC to it and will build it into a new case and I am not satisfied with all the games flashed to it plus I wan´t to add CBM Filebrowser in the flash file. Is the Arduino powered by USB or does it need separate power?
I have ordered one and hope I can solve this and reflash my DTV.

I failed to flash it from PC the last time so I had to flash it via a original 1541.
That took a little while ;)
Now I´m adding a uIEC to it and will build it into a new case and I am not satisfied with all the games
flashed to it plus I wan´t to add CBM Filebrowser in the flash file.

]]> Kommentar zu MacVICE von MW http://lallafa.de/blog/macvice/comment-page-1/#comment-9369 MW Wed, 21 Mar 2012 22:47:11 +0000 http://lallafa.de/blog/index.php/macvice-homepage/#comment-9369 Just a comment to say thanks for the work on MacVICE. Hope you keep the project active! Just a comment to say thanks for the work on MacVICE. Hope you keep the project active!

]]> Kommentar zu DiskImagery64 von passatuner http://lallafa.de/blog/diskimagery64/comment-page-1/#comment-9365 passatuner Thu, 15 Mar 2012 15:45:24 +0000 http://lallafa.de/blog/??page_id=15#comment-9365 Moin Moin! Funktioniert bei mit unter OSX Lion leider nicht. Ich kann im Dateiauswahlmenü nichts auswählen um ein Image zuspeichern. Doesn't work under OSX Lion. Cannot not enter anything in the filerequester when i want to save it :( Moin Moin!

Funktioniert bei mit unter OSX Lion leider nicht. Ich kann im Dateiauswahlmenü nichts auswählen um ein Image zuspeichern.

Doesn’t work under OSX Lion. Cannot not enter anything in the filerequester when i want to save it

:(

]]> Kommentar zu Nibtools on Mac von Kaizen http://lallafa.de/blog/opencbm-on-mac/nibtools-on-mac/comment-page-1/#comment-9360 Kaizen Fri, 17 Feb 2012 21:13:29 +0000 http://lallafa.de/blog/#comment-9360 OK... all files upgraded and now it works: ZoomFloppy + 1571 is a winning team! ;-) OK… all files upgraded and now it works: ZoomFloppy + 1571 is a winning team! ;-)

]]> Kommentar zu Nibtools on Mac von Kaizen http://lallafa.de/blog/opencbm-on-mac/nibtools-on-mac/comment-page-1/#comment-9359 Kaizen Tue, 14 Feb 2012 21:59:30 +0000 http://lallafa.de/blog/#comment-9359 Nothing... 1571 with SRQ doesn't working. :-/ Nothing… 1571 with SRQ doesn’t working. :-/

]]> Kommentar zu Nibtools on Mac von Kaizen http://lallafa.de/blog/opencbm-on-mac/nibtools-on-mac/comment-page-1/#comment-9358 Kaizen Tue, 14 Feb 2012 13:22:42 +0000 http://lallafa.de/blog/#comment-9358 Just tried with: > curl -O http://www.lallafa.de/files/nibtools/Portfile /nibtools > sudo port uninstall nibtools /nibtools > sudo port install Portfile changed since last build; discarding previous state. Warning: No port opencbm found in the index. Warning: No port opencbm found in the index. ---> Computing dependencies for nibtools ---> Fetching archive for nibtools ---> Attempting to fetch nibtools-0.5.0_493.darwin_9.i386.tbz2 from http://packages.macports.org/nibtools ---> Fetching nibtools ---> Attempting to fetch make.patch from http://www.lallafa.de/files/nibtools ---> Attempting to fetch nibtools-r493.tgz from http://www.lallafa.de/files/nibtools ---> Verifying checksum(s) for nibtools ---> Extracting nibtools ---> Applying patches to nibtools ---> Configuring nibtools ---> Building nibtools ---> Staging nibtools into destroot ---> Installing nibtools @0.5.0_493 Error: Dependency not found ---> Activating nibtools @0.5.0_493 ---> Cleaning nibtools /nibtools > port contents Port nibtools contains: /opt/local/bin/nibconv /opt/local/bin/nibread /opt/local/bin/nibrepair /opt/local/bin/nibscan /opt/local/bin/nibwrite /opt/local/share/doc/nibtools/readme.txt /nibtools > sudo port install ---> Computing dependencies for nibtools ---> Cleaning nibtools Now it seems that has been installed... greetings from Hokuto Force! ;-) Just tried with:

> curl -O http://www.lallafa.de/files/nibtools/Portfile

/nibtools > sudo port uninstall nibtools

/nibtools > sudo port install
Portfile changed since last build; discarding previous state.
Warning: No port opencbm found in the index.
Warning: No port opencbm found in the index.
—> Computing dependencies for nibtools
—> Fetching archive for nibtools
—> Attempting to fetch nibtools-0.5.0_493.darwin_9.i386.tbz2 from http://packages.macports.org/nibtools
—> Fetching nibtools
—> Attempting to fetch make.patch from http://www.lallafa.de/files/nibtools
—> Attempting to fetch nibtools-r493.tgz from http://www.lallafa.de/files/nibtools
—> Verifying checksum(s) for nibtools
—> Extracting nibtools
—> Applying patches to nibtools
—> Configuring nibtools
—> Building nibtools
—> Staging nibtools into destroot
—> Installing nibtools @0.5.0_493
Error: Dependency not found
—> Activating nibtools @0.5.0_493
—> Cleaning nibtools

/nibtools > port contents
Port nibtools contains:
/opt/local/bin/nibconv
/opt/local/bin/nibread
/opt/local/bin/nibrepair
/opt/local/bin/nibscan
/opt/local/bin/nibwrite
/opt/local/share/doc/nibtools/readme.txt

/nibtools > sudo port install
—> Computing dependencies for nibtools
—> Cleaning nibtools

Now it seems that has been installed… greetings from Hokuto Force! ;-)

]]>