In my plipbox project a fairly fast AVR 8-bit MCU with 16 MHz was connected to the Amiga’s parallel port to transfer incoming and outgoing IP packets from/to the attached Ethernet controller. A protocol on the parallel port was devised to quickly transmit the bytes in both directions. In version 0.6 a data rate of up to 240 KB/s was achieved… The question now arises if this is the top speed we can get or is the parallel port capable of more?
This blog post shows the results of my experiments I performed with the parallel port on my Amiga. It tries to show different classes of transfers possible on this port and gives the achievable maximum speed of each class.
Since the available documents and data sheets are all lacking the exact description of the I/O part on the peripheral side of the device, this blog post is also an effort to try to document this undocumented side of the parallel port (or: “What you always wanted to know about your CIA 8520 and never dared to ask”)